ASA5512-FPWR-K9
ASA5512-FPWR-K9 Обзор
Figure 2 shows the front panel of ASA5512-FPWR-K9.
Table 2 shows the Front Panel LEDs’ descriptions.
|
LED |
Color |
Description |
|
BOOT |
Flashing green |
Power-up diagnostics are running, or system is booting. |
|
Solid green |
System has passed power-up diagnostics. |
|
|
Off |
Power-up diagnostics are not operational. |
|
|
ACTIVE |
Solid green |
Failover pair is operating normally. |
|
Off |
Failover is not operational. |
|
|
PS |
- |
Power supply status |
|
ALARM |
Off |
Normal operating system function. |
|
Solid amber |
Critical Alarm indicating one or more of the following: –a major failure of a hardware or software component. –an over-temperature condition. –power voltage is outside of the tolerance range. |
|
|
VPN |
Solid green |
VPN tunnel is established. |
|
Off |
No VPN tunnel established. |
|
|
HD |
Flashing green |
Proportioned to read/write activity. |
|
Solid amber |
Hard-disk drive failure. |
|
|
Off |
No hard-disk drive present. |
Figure 2 shows the back panel of ASA5512-K9.
Note：
|
① |
LEDs |
④ |
six Gigabit Ethernet data interfaces |
|
② |
One Console port |
⑤ |
AC Socket |
|
③ |
two USB Ports |
⑥ |
one Management 0/0 interface |
· There are six LEDs on the back panel: POWER, ALARM, BOOT, ACTIVE, VPN, and HD.
ASA5512-FPWR-K9 Specification |
|
|
Product Number |
ASA5512-FPWR-K9 |
|
Product Description |
ASA 5512-X with FirePOWER Services, 6GE data, AC, 3DES/AES, SSD |
|
Throughput: Application Control (AVC) |
300 Mbps |
|
Throughput: Application Control (AVC) and IPS |
150 Mbps |
|
Maximum concurrent sessions |
100,000 |
|
Maximum New Connections per second |
10,000 |
|
Supported applications |
More than 3,000 |
|
URL categories |
80+ |
|
Number of URLs categorized |
More than 280 million |
|
Centralized configuration, logging, monitoring, and reporting |
Multi-device Cisco Security Manager (CSM) and Cisco Firepower Management Center |
|
On-Device Management |
ASDM |
|
Feature |
Cisco ASA 5512-X w/ FirePOWER Services |
|
Stateful inspection throughput (maximum) |
1 Gbps |
|
Stateful inspection throughput (multiprotocol) |
500 Mbps |
|
Triple Data Encryption Standard/ |
200 Mbps |
|
Users/nodes |
Unlimited |
|
IPsec site-to-site VPN peers |
250 |
|
Cisco AnyConnect Plus/Apex VPN maximum simultaneous connections |
250 |
|
Virtual interfaces (VLANs) |
50; 100 |
|
Security contexts(included; maximum) |
0,0; 2,5 |
|
High availability |
Requires Security Plus License; Active/Active and Active/Standby |
|
Integrated Wireless Access Point (See Cisco AP 702 datasheet for WiFi technical details) |
N/A |
|
Expansion slot |
1 interface card |
|
User-accessible Flash slot |
No |
|
USB 2.0 ports |
2 |
|
Integrated I/O |
6 GE copper |
|
Expansion I/O |
6 GE copper or 6 GE Small Form-Factor Pluggable (SFP) |
|
Dedicated management port |
Yes (1 GE) |
|
Serial ports |
1 RJ-45 console |
|
Solid-state drive |
1 slot, 120 GB multiline configurator self-encrypting drive (MLC SED) |
|
Memory |
4 GB |
|
System flash |
4 GB |
|
System bus |
Multibus architecture |
|
Temperature |
23 to 104°F (-5 to 40°C) |
|
Relative humidity |
10 to 90 percent noncondensing |
|
Altitude |
Designed and tested for 0 to 15,000 ft (4572 m) |
|
Acoustic |
64.2 dBA max |
|
Temperature |
-13 to 158ºF (-25 to 70ºC) |
|
Relative humidity |
10 to 90 percent noncondensing |
|
Altitude |
Designed and tested for 0 to 15,000 ft (4570 m) |
|
AC range line voltage |
100 to 240 VAC |
|
AC normal line voltage |
100 to 240 VAC |
|
AC current |
4.85A |
|
AC frequency |
50/60 Hz |
|
Dual-power supplies |
None |
|
DC domestic line voltage |
-40.5 to 56 volts direct current (VDC) (-48 VDC nominal) |
|
DC international line voltage |
-55 to -72 VDC (-60 VDC nominal) |
|
DC current |
15A (maximum input) |
|
Steady state |
51W |
|
Maximum |
56W |
|
Maximum |
192 Btu/hr |
|
Form factor |
Desktop, rack mountable |
|
Dimensions(H x W x D) |
1.67 x 16.7 x 15.6 in.(4.24 x 42.9 x 39.5 cm) |
|
Weight (with AC power supply) |
13.39 lb (6.07 kg) |