ASA5545-FPWR-K9
ASA5545-FPWR-K9 Обзор
1 copper GE management port,
1 expansion slot
Figure 1 shows the front panel of ASA5545-FPWR-K9.
Table 2 shows the Front Panel LEDs’ descriptions.
|
LED |
Color |
Description |
|
BOOT |
Flashing green |
Power-up diagnostics are running, or system is booting. |
|
Solid green |
System has passed power-up diagnostics. |
|
|
Off |
Power-up diagnostics are not operational. |
|
|
ACTIVE |
Solid green |
Failover pair is operating normally. |
|
Off |
Failover is not operational. |
|
|
PS |
- |
Power supply status |
|
ALARM |
Off |
Normal operating system function. |
|
Solid amber |
Critical Alarm indicating one or more of the following: –a major failure of a hardware or software component. –an over-temperature condition. –power voltage is outside of the tolerance range. |
|
|
VPN |
Solid green |
VPN tunnel is established. |
|
Off |
No VPN tunnel established. |
|
|
HD0 |
Flashing green |
Proportioned to read/write activity. |
|
Solid amber |
Hard-disk drive failure. |
|
|
Off |
No hard-disk drive present. |
|
|
HD1 |
Flashing green |
Proportioned to read/write activity. |
|
Solid amber |
Hard-disk drive failure. |
|
|
Off |
No hard-disk drive present. |
Figure 2 shows the back panel of ASA5545-FPWR-K9.
Note：
|
① |
LEDs |
⑤ |
AC Socket |
|
② |
One Console port |
⑥ |
one Management 0/0 interface |
|
③ |
Two USB Ports |
⑦ |
I/O slot |
|
④ |
Eight Gigabit Ethernet data interfaces |
· There are seven LEDs on the back panel: POWER, ALARM, BOOT, ACTIVE, VPN, HD0 and HD1.
ASA5545-FPWR-K9 Specifications |
|
|
Throughput: Application Control (AVC) |
1,500 Mbps |
|
Throughput: Application Control (AVC) and IPS |
1,000 Mbps |
|
Maximum concurrent sessions |
750,000 |
|
Maximum New Connections per second |
30,000 |
|
Supported applications |
More than 3,000 |
|
URL categories |
80+ |
|
Number of URLs categorized |
More than 280 million |
|
Centralized configuration, logging, monitoring, and reporting |
Multi-device Cisco Security Manager (CSM) and Cisco Firepower Management Center |
|
On-Device Management |
ASDM |
|
Feature |
Cisco ASA 5545-X w/ FirePOWER Services |
|
Stateful inspection throughput (maximum1) |
3 Gbps |
|
Stateful inspection throughput (multiprotocol2) |
1.5 Gbps |
|
Triple Data Encryption Standard/ |
400 Mbps |
|
Users/nodes |
Unlimited |
|
IPsec site-to-site VPN peers |
2500 |
|
Cisco AnyConnect Plus/Apex VPN maximum simultaneous connections5 |
25005 |
|
Virtual interfaces (VLANs) |
300 |
|
Security contexts5(included; maximum) |
2; 50 |
|
High availability4 |
Active/ |
|
Integrated Wireless Access Point (See Cisco AP 702 datasheet for WiFi technical details) |
N/A |
|
Expansion slot |
1 interface card |
|
User-accessible Flash slot |
- |
|
USB 2.0 ports |
2 |
|
Integrated I/O |
8 GE copper |
|
Expansion I/O |
6 GE copper or 6 GE SFP |
|
Dedicated management port |
Yes |
|
Serial ports |
1 RJ-45 console |
|
Solid-state drive |
2 slots, RAID 1 or 120 GB MLC SED |
|
Memory |
12 GB |
|
System flash |
8 GB |
|
System bus |
Multibus architecture |
|
Temperature |
23 to 104°F (-5 to 40°C) |
|
Relative humidity |
90 percent |
|
Altitude |
Designed and tested for 0 to 10,000 ft (3050 m) |
|
Temperature7 |
-13 to 158°F (-25 to 70°C) |
|
Relative humidity |
10 to 90 percent |
|
Altitude |
Designed and tested for 0 to 15,000 ft (4572 m) |
|
AC range line voltage |
100 to 240 VAC |
|
AC normal line voltage |
100 to 240 VAC |
|
AC current |
5A, 100 to 120V or 2.5A, 200 to 240V |
|
AC frequency |
50/60 Hz |
|
Dual-power supplies |
Yes |
|
DC domestic line voltage |
-40.5 to 56 VDC (-48 VDC nominal) |
|
DC international line voltage |
-55 to -72 VDC (-60 VDC nominal) |
|
DC current |
15A (maximum input) |
|
Steady state |
86W |
|
Maximum |
125W |
|
Maximum |
427 Btu/hr |
|
Form factor |
1RU, 19-in. rack-mountable |
|
Weight (with AC power supply) |
16.82 lb (7.63 kg) with single power supply; 18.86 lb (8.61 kg) with dual power supply |