HWIC-1CE1T1-PRI
HWIC-1CE1T1-PRI Обзор
The modules can be used in T1 or E1 networks, selectable by software configuration. The integrated channel service unit/data service unit (CSU/DSU) function allows customers to consolidate customer premises equipment (CPE). The modules support balanced and unbalanced E1 connectivity and conform to the G.703 and G.704 standards for unframed and framed E1 modes. The Channelized T1/E1 and ISDN PRI modules work with the digital modem module in the Cisco 2800, 2900, 3800, and 3900 Series Integrated Services Routers to provide V.90- and V.92-compliant digital dial access aggregation.
• (1.91 x 7.82 x 12.04 cm)
• CiscoWorks
• All other previously existing applicable Cisco IOS Software debugs
HWIC-1CE1T1-PRI Specification |
|
Description |
1 port channelized T1/E1 and PRI HWIC (data only) Cisco Router High-Speed WAN Interface card |
Diagnostic Loopback Support |
• E1 loopback modes: • Controller local loopback • Interface local loopback • T1 loopback modes: • Interface local loopback • Interface remote loopback • Controller local loopback • Controller remote loopback • CSU loopback modes for T1 CSU: • Data terminal equipment (DTE) loopback • Network loopback • Payload loopback |
Alarm Detection |
• Yellow Alarm-Receive/Send from/to network • Blue Alarm-Receive alarm indication signal (AIS) from network • Red Alarm-Loss of network signal |
Relevant MIB Support |
• T1 MIB (RFC1406-MIB) • Cisco Integrated DSU/CSU MIB (CISCO-ICSUDSU-MIB) |
Remote Management |
• Cisco CNS 2100 Series Intelligence Engine (IE2100) • CiscoWorks |
Signaling Debugging |
• ISDN Q.921 and Q.931 decode • All other previously existing applicable Cisco IOS Software debugs |
Dimensions (H x W x D) |
• HWIC-1CE1T1-PRI: 0.75 x 3.08 x 4.74 in. • (1.91 x 7.82 x 12.04 cm) |
Weight |
• HWIC-1CE1T1-PRI: 0.18 lb (0.08 kg) |
Operating Temperature |
• 32 to 104°F (0 to 40°C) |
Nonoperating Temperature |
• -40 to 158° F (-40 to 70°C) |
Relative Humidity |
• 5-95% noncondensing |
LEDs |
LEDs per port • Carrier Detect/Loopback (CD/LP): • Off = No carrier detect • Green On = Carrier detect • Yellow On = Port in loopback mode • Alarm (AL): • Off = No alarms • Yellow On = Port in alarm mode LEDs per module (on NM-8CE1T1-PRI only): • EN: • Off = Card not available • On = Card enabled |
Ports |
• 1, 2, or 8 T1/E1 ports on RJ-48C connectors |
Line Bit Rate (per Port) |
• E1: (2.048 Mbps) • T1: (1.544 Mbps) |
Line Coding |
• E1: High-density bipolar three (HDB3 ) • T1: Alternate mark inversion (AMI) and binary 8-zero substitution (B8ZS |
Framing Formats |
• E1: CRC4 • T1: Super Frame (SF) and Extended Super Frame (ESF) |
Output Levels |
• E1: short-haul/long-haul • T1 (line build-out [LBO]): 0, -7.5, or -15 dB |