SPA-2XCHOC12/DS0
SPA-2XCHOC12/DS0 Обзор
Height: 1.56 in. (3.96 cm) (double height)
Width: 6.75 in. (17.15 cm)
Depth: 7.28 in. (18.49 cm)
Visual status indicators (LEDs):
SPA-2XCHOC12/DS0 Specifications |
|
|
Type |
Cisco ASR 9000 Series Shared Port Adapter |
|
Product compatibility |
Cisco ASR 9000 Series Router |
|
Port density per SPA |
2-port channelized OC-12/STM-4 |
|
Physical interface |
OC-12c/STM-4 Small Form-Factor Pluggable (SFP) optics module Visual status indicators (LEDs): • SPA status LED • Per-port LEDs • Carrier and alarm • Active and loopback |
|
Protocols |
IETF RFC 1490, Frame Relay Encapsulation RFC 1662, Point-to-Point Protocol (PPP) in High-Level Data Link Control (HDLC)-like framing Cisco HDLC Multilink PPP (RFC 1990) (as applicable for 2-port channelized OC-12c/STM-4 (DS-1/E1) FRF.12, link fragmentation and interleaving (LFI) PPP, HDLC, and Frame Relay User Network Interface (UNI) encapsulations |
|
Features and functions |
DS-3 • Full- and half-duplex connectivity at DS-3 rate (44.736 MHz) • Scrambling and subrate support of major data-service-unit (DSU) vendors • C-bit or M23 framing (software selectable) • MDL • Support for 16- and 32-bit cyclic redundancy check (CRC) (16-bit default) • 24-hour history maintained for error statistics and failure counts • DS-3 alarm and event detection (once-per-second polling) • Alarm indication signal (AIS) • Out of frame (OOF) • Far-end receive failure (FERF) DS-1 • Superframe (SF) and Extended Superframe (ESF) support • ANSI T1.403 FDL support • Internal or line-derived (loop) clocking, independently selectable on each T1 tributary • Error and alarm detection: CRC errors, framing errors, loss of frame (red), AIS (blue), remote alarm indication (yellow) • Alarm reporting: 24-hour history maintained, 15-minute intervals on all errors • BERT at T1 level • Loopback capabilities: local, network line and network payload, remote network line, and remote network payload at the T1 level |
|
SONET errors, alarms, and performance monitoring |
Synchronization: • Local (internal) or loop timed (recovered from network) • Pointer activity monitoring • Redundant clock source should be provisioned on different SPAs as only a single timing source can be provided by SPA Local (diagnostic) and line (network) loopback Payload mapping • POS with 1 + X^43 self-synchronous scrambler SONET/SDH compliance: • Telcordia (Bellcore) GR-253-CORE (as applicable) • ANSI T1.105, T1.231 • ITU-T G.707, G.957, G.825 (as applicable) Supported SONET/SDH alarm and signal events: • Signal failure bit error rate (SF-ber) • Signal degrade bit error rate (SD-ber) • Signal label payload construction (C2) • Path trace byte (J1) • Section • Loss of signal (LoS) • Loss of frame (LoF) • Error counts for B1 • Threshold crossing alarms (TCA) for B1 • Line • Line alarm indication signal (LAIS) • Line remote defect indication (LRDI) • Line remote error indication (LREI) • Error counts for B2 • TCA for B2 • Path • Path alarm indication signal (PAIS) • Path remote defect indication (PRDI) • Path remote error indication (PREI) • Error counts for B3 • TCA for B3 • Loss of pointer (LoP) • Positive stuffing event (PSE) • Negative stuffing event (NSE) • Path unequipped indication signal (PUNEQ) • Path payload mismatch indication signal (PPLM) |
|
Network management |
SONET-MIB (RFC 3592) SONET/SDH-MIB (RFC 2558) CISCO-SONET-MIB DS-3/E3-MIB (RFC 3896) DS-1/E1-MIB (RFC 2496) Simple Network Management Protocol (SNMP) |
|
Reliability and availability |
Online insertion and removal (OIR) Field-replaceable SFP optical modules 1+1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section Protection (MSP) protocols (please check platform support) Single SPA software reset |
|
Physical specifications |
Weight: 1.27 lb (0.57 kg) Height: 1.56 in. (3.96 cm) (double height) Width: 6.75 in. (17.15 cm) Depth: 7.28 in. (18.49 cm) |
|
Power |
2-port channelized OC-12/STM-4 = 52.0W (with optics) |
|
Environmental specifications |
Operating temperature: 41 to 104°F (5 to 40°C) Storage temperature: -38 to 150°F (-40 to 70°C) Operating humidity: 5 to 85% relative humidity Storage humidity: 5 to 95% relative humidity |
|
Compliance and agency approvals |
Safety • UL 60950 • CSA 22.2-No.60950 • EN60950 • IEC 60950 CB Scheme • ACA TS001 • AS/NZS 3260 • EN60825\IEC60825 laser safety (SR, IR-Class 1) (VSR-Class 1M)1 • 21CFR1040 -FDA Code of Federal Regulations (USA) laser safety (SR, IR-Class 1) (VSR-Class 1M)1 EMC • FCC Part 15 (CFR 47) • ICES 003 • EN55022 • CISPR 22 • AS/NZS CISPR22 • VCCI • EN55024 • EN50082-1 • EN61000-6-1 • EN61000-3-2 • EN61000-3-3 Network Equipment Building Standards (NEBS) This product is designed to meet the following requirements (official qualification may be in progress): • SR-3580 - NEBS: Criteria levels (Level 3 compliant) • GR-63-CORE - NEBS: Physical protection • GR-1089-CORE - NEBS: EMC and safety |