WS-X6716-10G-3C

Модель:

WS-X6716-10G-3C

Описание:

Catalyst 6500 16 port 10 Gigabit Ethernet w/ DFC3C (req X2)

Доступность:

10 шт.

Стоимость:

G: $40,000

Стоимость со скидкой:

S: $32,000

Стоимость со скидкой:

S: руб 2 911 593.60

Вы экономите:

$8,000 (20% скидка)

Количество:

В корзину

Доставка:

2-6 дней, через СДЭК, Деловые Линии или другие компании

Быстрая доставка

Отправка со склада или под заказ
Доставка ТК по всей России
Курьерская доставка по Москве

Подробнее

Оплата

Гибкая система оплаты
Кредитование

Подробнее

WS-X6716-10G-3C Обзор

WS-X6716-10G-3C consists of 16 X2 10 Gigabit Ethernet fiber ports line card module for Cisco Catalyst 6500 series only.* WS-X6716-10G-3C equipped with WS-X6716-10G and WS-F6700-DFC3C and primarily designed for Supervisor Engine 720 with 3C daughter card to support Cisco 6500 Virtual Switching System (VSS) 1440. WS-X6716-10G-3C is ideally suited for LAN campus aggregation and data center access. Users can configure 4 port groups of 4 ports each, each port group in either oversubscription mode or performance mode. In performance mode, up to 4 10 Gigabit Ethernet ports can be used to create a virtual switch link in a VSS.

Product Code

WS-X6716-10G-3C

Ports

Feature

16-Port 10GbE Fiber Module

Supervisor engines supported

Cisco Catalyst 6500 Series Virtual Switching Supervisor Engine 720 with 10GE uplinks or Supervisor Engine 720 with any PFC (chassis will work in lowest common denominator mode)

Port Buffers

Oversubscription mode:
90 MB per port group
Performance mode:
200 MB per port

Scheduler

Oversubscription mode:
DWRR
WRED
Performance mode:
DWRR
WRED
SRR at egress

Onboard Memory

1 GB default

Oversubscription

4:1

Slot requirements

Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E, or 6509-NEB-A chassis
Can occupy only slots 9 through 13 in a Cisco Catalyst 6513 chassis

Optics

Switch fabric connection

40 Gbps (80 Gbps full duplex)

Forwarding engine

WS-X6716-10G-3C: equipped with DFC3C for distributed forwarding, supporting 256,000 routes

Queues

Oversubscription mode:
Receive: 1p7q2t per port
Transmit: 1p7q4t per port group
Performance mode:
Receive: 8q4t per port
Transmit: 1p7q4t per port

Queuing mechanisms

CoS-based queue mapping
DSCP-based queue mapping

Hardware-based multicast replication(Layer 2)

Ingress and egress
Approximately 20 GB per replication engine
2 replication engines per module

Hardware-based multicast replication(Layer 3)

Ingress and egress
Approximately 20 GB per replication engine
2 replication engines per module

Jumbo frame support for bridged and routed packets

Up to 9216 bytes

Maximum port density per chassis

130 ports (9-slot chassis)

Maximum port density per VSS

260 ports

Can be used to form virtual switch link

Performance mode: Yes (supported in a subsequent software release)
Oversubscription mode: No

Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules Specifications
Standard protocols	IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3ak, IEEE 802.3aq, and IEEE 802.3an
Physical specifications	● Occupies one slot in the Cisco Catalyst 6500 Series chassis or Cisco 7600 Series chassis ● Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm) ● Weight: ◦ Cisco Catalyst 6708 and 6716: 13 pounds excluding X2 components; ¼ pound for each X2 ◦ Cisco Catalyst 6704: 10 pounds excluding XENPAK and DFC components; 2/3 pound for each XENPAK
Environmental conditions	Operating temperature: ● Agency-certified for operation: 32 to 104°F (0 to 40°C) ● Design and tested for operation 32 to 130°F (0 to 55°C) ● Storage temperature: –40 to 167°F (–40 to 75°C) ● Relative humidity: 10 to 90 percent, noncondensing Operating altitude: ● Agency-certified for operation: –500 to 6500 ft (–150 to 2000m) ● Designed and tested for operation –500 to 10000 ft (–150 to 3000m)
Regulatory compliance	Cisco Catalyst 6500 Series 10 Gigabit Ethernet modules, when installed in a system, comply with the following EMC and safety standards: EMC Standards: ● FCC Part 15 (CFR 47) Class A ● ICES-003 Class A ● VCCI Class A ● EN55022 Class A ● EN55024 ● CISPR24 ● CISPR 22 Class A ● AS/NZS CISPR 22 Class A ● ETS 300 386 ● KN 22 Class A ● EN 50082-1 ● EN61000-3-2 ● EN61000-3-3 ● EN61000-6-1 ● CNS13438 Class A ● KN6100 -4 Series Safety Standards: ● UL 60950-1 ● CAN/CSA C22.2 No. 60950 ● EN 60950-1 ● IEC 60950-1 ● AS/NZS 60950-1 ● IEC 60825 Class 1 ● EN 60825 Class 1 ● 21CFR 1040
NEBS criteria levels	SR-3580 Issue 3, June 2007 (GR-63-CORE, issue 3, and GR-1089-CORE, issue 4)
ETSI	● ETS 300 019-2-1, Class 1.1 Storage ● ETS 300 019-2-2, Class 2.1 and 2.2 Transportation ● ETS 300 019-2-3, Class 3.1E Stationary Use
Network management	● ETHERLIKE-MIB (RFC 1643) ● IF-MIB (RFC 1573) ● Bridge MIB (RFC 1493) ● CISCO-STACK-MIB ● CISCO-VTP-MIB ● CISCO-CDP-MIB ● RMON MIB (RFC 1757) ● CISCO-PAGP-MIB ● CISCO-STP-EXTENSIONS-MIB ● CISCO-VLAN-BRIDGE-MIB ● CISCO-VLAN-MEMBERSHIP-MIB ● ENTITY-MIB (RFC 2037) ● HC-RMON ● RFC1213-MIB (MIB-II) ● SMON-MIB
Power requirements	● WS-X6716-10T-3C: 509.3W (12.1A @ 42V) ● WS-X6716-10T-3CXL: 538.7W (12.8A @ 42V) ● WS-X6716-10G-3C: 457.8W (10.9A @ 42V) ● WS-X6716-10G-3CXL: 487.2W (11.6A @ 42V) ● WS-X6708-10G-3C: 444.36W (10.58A @ 42v) ● WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V) ● WS-X6704-10GE with DFC3CXL: 362.46W (8.63A @ 42V) ● WS-X6704-10GE with DFC3C: 333.06W (7.93A @ 42V) ● WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V) ● WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V) ● WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V) ● WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V)
Indicators	● Status: green (operational), red (faulty), and orange (module booting) ● Link: green (port enabled and connected), orange (port disabled), and off (port enabled and not connected)