AIR-AP2802E-H-K9
AIR-AP2802E-H-K9 Обзор
- Management console port (RJ-45)
- USB 2.0 (enabled via future software)
- MRC
- 802.11ac Beamforming
- 20-, 40-, 80, 160-MHz channels
- PHY data rates up to 5.2 Gbps
- Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
- 802.11 DFS
- CSD support
- 256 MB flash
- 2.412 to 2.472 GHz; 13 channels
- 5.150 to 5.350 GHz; 8 channels
- 5.745 to 5.825 GHz; 5 channels
Figure 1 shows the face of AIR-AP2802E Model.
Notes:
① |
Dual-band antenna connector A with antenna |
④ |
Dual-band antenna connector C with antenna |
② |
Location of the Smart antenna connector port on the right side of the AP |
⑤ |
Status LED |
③ |
Dual-band antenna connector D with antenna |
⑥ |
Dual-band antenna connector B with antenna |
Figure 2 shows the Smart Antenna Connector and DART cable on the AIR-AP2802E model.
The 2802E model has a Smart antenna connector, which is connected directly to the flexible radio. Without a supported external antenna connected to the Smart Antenna connector, the flexible radio can stay only in 2.4 GHz mode. If an external antenna is connected, the flexible radio can be used in the full Flexible Radio Assignment mode, allowing dual 5 GHz and Wireless Security Monitoring modes.
To connect to any supported RP-TNC connector-type external antenna to the Smart antenna connector, use the DART cable connector AIR-CAB002-DART-R=, which is to be ordered separately.
AIR-AP2802E-H-K9 Specification | |
Networking | |
Type | Wireless access point |
Form Factor | External |
Connectivity Technology | Wireless |
Data Transfer Rate | 5.2 Gbps |
Data Link Protocol | IEEE 802.11a, IEEE 802.11ac Wave 2, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
Compliant Standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ad (LACP) |
Status Indicators | Boot state, Error, Status |
Features | 4T4R MIMO technology, Auto-sensing per device, Beamforming technology, CleanAir technology, ClientLink 4.0 technology, Cross AP Noise Reduction, Cyclic shift diversity (CSD), DFS support, High Density Experience (HDX), Link Aggregation Control Protocol (LACP), Maximum Ratio Combining (MRC), MIMO equalization, Optimized AP Roaming, Packet aggregation A-MPDU, Packet aggregation A-MSDU |
Wireless Protocol | 802.11a/b/g/n/ac Wave 2 |
Wi-Fi Bands | 2.4 GHz, 5 GHz |
Interface Provided | |
Qty | 1 |
Type | Console |
Connector Type | RJ-45 |
Miscellaneous | |
Included Accessories | Ceiling grid clip, Low profile bracket |
Service | |
Support Details Type | Limited warranty |
Support Details Service Included | Advance hardware replacement |
Support Details Full Contract Period | Lifetime |
Header | |
Compatibility | PC |
Country Kits | China |
Manufacturer | Cisco Systems |
Packaged Quantity | 1 |
Product Line | Cisco Aironet |
Model | 2802E |
Brand | Cisco |
Service & Support Details | |
Response Time | 10 days |
Software | |
Type | CAPWAP Software Image |
Capacity | |
Type | Spatial streams |
Value | 3 |
Dimensions & Weight | |
Width | 8.7 in |
Depth | 8.8 in |
Height | 2.5 in |
Service & Support | |
Type | Limited lifetime warranty |
Chassis | |
Ruggedized Design | Indoor |